C-Max RFF Point Graver — 45° Point
GRS ITEM #022-793

$19.50

Preshaped to 45° but should be sharpened properly before use. This RFF has angled sides similar to a V-Point or Square graver on the cutting edge, but the top is rounded. An RFF Point can be used for deep, narrow V-cuts, stone setting techniques, and straight line engraving. Length: 1.8″ (45.72 mm). Diameter: 0.125″ (3.175 mm). Use with QC Tool Holder for 1/8″ Round (#004-873). This graver features two flat alignment areas on the shank for quick orientation in a QC Tool Holder. The set screws on GRS QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately.

Best Seller position

No. 6 in C-Max RFF Point

Category:

Description

Similar to a knife graver and the C-Max V-Points, the new C-Max RFF Point Gravers are available in several geometries ranging from an ultra-narrow 30° to a wide 120°. The top is rounded to allow for maximum customization of relief angles while providing a comfortable surface. The sides are preshaped to reduce sharpening time for the cutting angles. This graver features two flat alignment areas on the shank for quick orientation in a QC Tool Holder. The set screws on GRS QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately.

C-Max RFF Point gravers use QC Tool Holder for 1/8″ Round (#004-873).

• Features a round top and precision-ground angled sides
• Preshaped to a 45° V-point angle for the cutting edge
• Works best for deep, narrow V-cuts, stone setting techniques, and straight line engraving

Additional information

Weight.0200 lbs

Manuals & Docs

No manuals or documents available. For product bundles, visit the individual product page for manuals and documents.

If you require documentation for this product, please contact us.

Videos

No videos found. If you would like to see a video for this product, please contact us.

SDS (Safety Data Sheets)

No SDS (safety data sheets) available. For product bundles, visit the individual product page for SDS (safety data sheets).

If you require documentation for this product, please contact us.